Hydraulic Cylinder for Metallurgical Equipment

Description
Y-HG1 series double-acting piston hydraulic cylinder is an actuator that uses hydraulic pressure to push the piston rod in both forward and reverse directions to drive the reciprocating linear motion of other working parts. The utility model features simple structure, reliable work, convenient assembly and disassembly, and can be equipped with a buffering and deflation device.

Features

1. Pressure:This standard cylinder is divided into two pressure levels of E/G. Class E is suitable for >6.3-16MPa (the hydraulic cylinder of this pressure range is called E-class cylinder); Class G is suitable for >16-25MPa (the hydraulic cylinder of this pressure range is called G-class cylinder).

2. Seal:The E-class cylinder uses a Yx-type seal with a simple structure and good wear resistance. The G-class cylinder is a V-shaped combination seal that is resistant to high pressure and reliable in sealing.

3. Dustproof:This hydraulic cylinder is made of polyurethane or butyl rubber without skeleton dust ring.

4. Applicable medium: hydraulic oil, mechanical oil, emulsion, not suitable for phosphate ester.

5. Applicable temperature: -40 °C to +80 °C, not suitable for low temperatures below -40 °C or higher than +80 °C.

6. Structure:This standard cylinder is equipped with 17 types of cylinder diameters(40,50,63,80,90,100,110,125,140,150,160,180,200,220,250,280,320)in accordance with two speed ratios to reach 34 stipulations.Divided into gap buffer and  buffer structurewithout gap.The cylinder head and the cylinder tail can also have a one-way bleed valve, which can be used for quick start with a buffer cylinder and for deflation.The rod dust seal has a replaceable structure for on-site maintenance. The piston rod is coated with protective hard chrome, which is dust-proof, rust-proof, anti-corrosive and wear-resistant.

7. Installation connection: in line with the international ISO6020/1-1981 series hydraulic cylinder installation connection size.Basic types of different cylinder bores include, front and rear rectangle flanges, front and rear mounting flanges, front and rear round flanges, front, middle and rear hinge shafts, head single earrings, axial and radial tripods total 13 Installation forms.In addition to the axial tripod type, the dimensions of mounting connection are in accordance with I6020, 1-1981.
    

Ordering instruction

1. Pressure class E can be applied to working pressures of 6.3~16MPa.

2. In addition to the middle hinge shaft indicated specific dimensions, the rest can be filled according to the symbols on the table.The external connection dimensions can be referred to the table.

3. If gap buffer is required, please fill in the H match.

4. Please fill in the stroke according to the division in Table 4 of the stroke series.

5. For the working medium, applicable temperature, test, exterior painting, packaging, etc. of the hydraulic cylinder requirement, please specify.

6. The rod end earrings are customized according to users.

   Technology exchange